How to maintain the life of industrial chiller?      

Using industrial chillers, the contents of the supporting manual should be fully familiar. From the steps of the switch to the specific method of use, should be fully studied and standardized.

The most critical point is the choice of operating environment, operation methods and maintenance procedures, etc., which are the key issues we should pay attention to and should be constrained. Excellent performance, with the upgrading and upgrading of production technology, Industry chiller production and processing are also subject to many upgrades. Although not very precise and rigorous equipment, each use, for industrial cold water Machine is a wear and tear.
How to maintain industrial chiller life? The need to regularly maintain and inspect industrial chillers.
First, Industrial Chillers Use cautions?
Normal operation in accordance with requirements and processes to better utilize the efficiency of the equipment while also assuring operational safety. We need to carefully use the instructions before proceeding with the equipment installation. Reading and studying again, especially the notes in the manual must be kept in mind during the next operation.
Next, equipment installation, operation, and maintenance require professional staff to handle it. If we privately dismantle and repair later, we can't count as item failure within the scope of the repair, so when When the machine encounters any problem, it must contact the brand after-sales service and report to the professional personnel to deal with the problem. In the process of handling, we need to handle it gently to prevent the internal parts from loosening due to vibration and cause equipment failure.

3. We cannot start the equipment when there is no coolant in the tank.

Second,IndustryChiller"? 

Maintenance of chillers. First, the device's protective devices are already set by the merchant before they leave the factory. Make arbitrary changes to ensure the effective operation of the machine.

 Secondly, we need to shut down the equipment when the equipment fails. When the warning light goes out, we can further check the cause of the failure. Remind everyone that if it is not an emergency, we do not shut down the machine by turning off the power. This will cause great harm to the device itself.
 In addition, during the use of the equipment, we must ensure good ventilation and heat dissipation, ensure air circulation around the machine, and regularly clean the heat coil Before using the chiller, make sure that the fan's steering is correct. If it is reversed, even the power cord must be replaced in order to operate the equipment effectively.

This article comes from industrial chiller manufacturers www.dgcarno.com.cn